40X700 1/4" BSP DBLE ACT CYLINDER
Notify me when this product is back in stock
Once this product is restocked, you will receive an email.
Specification
1/4" BSP Parallel Female Ports, 40mm Bore x 700mm Stroke, Series 61 Double Acting ISO15552 Cylinder, Magnetic, ¯40mm, Extruded with Reed Switch Slots Barrel Configuration, Aluminium Barrel x Stainless Steel Piston Rod, Adjustable Cushioning, M12 x 1.25 Male Rod Thread, Working Temperature 0°C to +80°C, Working Pressure 1 to 10 bar, Camozzi
In compliance with ISO 15552 standards and with the previous DIN/ISO 6431 - VDMA 24562 standards. Rolled stainless steel rod. Clean design with adjustable pneumatic cushioning. Special designs available. Type of construction: with tie-rods (inside the profile). Operation: double-acting, single-acting, tandem. Low friction version: double-acting only. Materials: standard = aluminium end-blocks and piston, rolled stainless steel AISI 420B rod, anodised aluminium tube, zinc-plated steel tie-rods and tie-rod nuts, PU seals Low friction = standard materials with NBR piston seal and NBR rod seal (FKM rod seal on request). Type of mounting: with front rear flange, foot mounting, with front/rear/centre/swivel trunnion. Strokes, min - max: 10 to 2500mm. Operating temperature: 0°C to +80°C (with dry air: +20°C). Operating pressure: 1 to 10 bar (standard versions). 0.1 to 10 bar (low friction version). Speed: 10 to 1000mm/sec, no load (standard versions). 5 to 1000mm/sec, no load (low friction version). Fluid: filtered air, without lubrication. For standard versions only: if lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Full range of ISO cylinders available including large bore (160, 200 and 250mm) and stainless steel options. Non stock strokes available on request.
Details
| Barrel Configuration | Extruded with Reed Switch Slots |
| Barrel Material | Aluminium |
| Bore Size mm | 40 |
| Brand | Camozzi |
| Cushioning | Adjustable |
| Piston Rod Material | Stainless Steel |
| Piston Rod Thread | M12 x 1.25 |
| Piston Rod Thread Gender | Male |
| Port Size Inch | 1/4" |
| Thread Gender | Female |
| Thread Type | BSPP |
| Working Pressure bar | 1 to 10 |
| Working Temperature | 0°C to +80°C |
Downloads
Technical data sheet(s)
Delivered straight to your customer
Place multiple orders in one day, and only pay delivery once
Order before 10pm for next-day delivery
The team to help grow your business
Our Experts are always on hand to help
Bespoke solutions for any requirement
The Flowtech Guarantee
Should any defects develop under proper use of the goods supplied within a period of 12 months after delivery as a consequence of design, materials or workmanship then we will make good by repair or replacement any such defect providing the defective goods are returned to us promptly.