ES2000 SERIES OIL/WATER SEPARATOR

Product code: ES2200
£1,122.99
Buy price
Available to Order

Notify me when this product is back in stock

Once this product is restocked, you will receive an email.

Specification

3/4" Inlet x 3/4" Outlet, Oil/Water Separator, E2000 Series, Working Temperature +5°C to +35°C, Maximum Working Pressure 16 bar, Domnick Hunter

Product Selection: All Domnick Hunter condensate drain & oil/water separators are sized based upon the maximum condensate volume produced at a given set of ambient conditions. Should the conditions differ from those shown below, please contact our Technical Sales Department for correct model selection. IMPORTANT NOTE: The performance of the oil/water separator and the economic service life of the activated carbon is dependent upon the degree of oil dispersion and emulsification of the incoming condensate. The frequency of activated carbon pack changes will therefore depend upon the following factors. Compressor type and capacity, lubricant used, condensate drainage method, ambient temperature, relative humidity, pressure and condensate drainage method. Static oil/water separators of this type will not totally separate oils that are soluble in water. For stable emulsions, use the Domnick Hunter EMS range of Membrane Emulsion Separators. Ambient Temperature at Compressor Inlet: 25°C (77°F). Relative Humidity at Compressor Inlet: 65%. Compressor Discharge Temperature: 35°C (95°F). System Pressure: 7 bar g (102 psi g). Refrigeration Dryer Dewpoint: 2°C (36°F).

Details

BrandParker Domnick Hunter
Inlet Size Inch3/4"
Maximum Working Pressure bar16
Working Temperature+5°C to +35°C

Downloads

Technical data sheet(s)
Delivered straight to your customer
Place multiple orders in one day, and only pay delivery once
Order before 10pm for next-day delivery
The team to help grow your business
Our Experts are always on hand to help
Bespoke solutions for any requirement
The Flowtech Guarantee

Should any defects develop under proper use of the goods supplied within a period of 12 months after delivery as a consequence of design, materials or workmanship then we will make good by repair or replacement any such defect providing the defective goods are returned to us promptly.